The Vortex separator uses a certain pressure to inject the liquid containing partide impurities into the cone at a high speed, so that the liquid generates external eddy curents in the cone. The solid particles in the liquid are thrown to the inner wall of the cone under the action of centrifugal force and discharged along the inner wall by the bottom flow port under the drive of gravity and liquid.The separated clean liquid spirals up along the axis of the cone after reaching the botom of the cone. The internal vortex is formed and discharged by the outlet of the vortex separator, so as to achieve the separation of dirty liquid and clean liquid. Suitable for separating partides in high speed grinding, strong grinding, general finishing coolant and low viscosity oil-based coolant. The vortex separator can be used in parallel to increase the flow rate, and can also be used in series to improve the fltration accuracy.
Scenario of main parameter
| AKWX-30(L/min) | AKWX-50(L/min) | AKWX-60(L/min) | AKWX-120(L/min) | AKWX-200(L/min) | ||||||
| Lift | Supply liquid | Clean liquid | Supply liquid | Clean liquid | Supply liquid | Clean liquid | Supply liquid | Clean liquid | Supply liquid | Clean liquid |
| 15 | 25 | 22 | 40 | 36 | 55 | 50 | 105 | 101 | 175 | 160 |
| 20 | 30 | 25 | 45 | 40 | 64 | 57 | 118 | 113 | 200 | 181 |
| 30 | 35 | 30 | 55 | 50 | 69 | 60 | 132 | 120 | 232 | 200 |
| Model number | A | B | C | D | E | F | G | H | J | R | S | T | V | W | X | Y | Weight(kg) |
| AK-WX-30 | 250 | 65 | 50 | G3/4 | 93 | 158 | 34 | 23 | 7 | 288 | 19 | 135 | 114 | 6 | G1/2 | G3/4 | 1.9 |
| AK-WX-50 | 323 | 85 | 65 | G1 | 97 | 226 | 38 | 27 | 7 | 371 | 25 | 130 | 100 | 8 | G1/2 | G1 | 3.4 |
| AK-WX-60 | 340 | 78 | 62 | G1 | 124 | 216 | 34 | 27 | 7 | 378 | 25 | 180 | 155 | 14 | G3/4 | G1 | 3.5 |
| AK-WX-120 | 460 | 110 | 75 | G1 | 133 | 326 | 39 | 38 | 10 | 498 | 25 | 145 | 120 | 16 | G1 | G1 1/4 | 5.9 |
| AK-WX-200 | 600 | 160 | 105 | G1 3/4 | 225 | 375 | 50 | 62 | 13 | 638 | 32 | 210 | 170 | 18 | G1 1/2 | G1 1/2 | 11.0 |
Selection Guide
To provide a more suitable pump, we need to understand as much detailed information as possible. You can request the working condition survey form from me. If you are replacing an existing pump, you can provide me with the original product model or nameplate.
